Re: Perkins 6.354 engine

Posted by Kevin (FL) on February 24, 2007 at 09:04:40 from (70.149.247.137):

In Reply to: Re: Perkins 6.354 engine posted by Rainer on February 23, 2007 at 22:21:20:

Rainer,

The pop-off pressure is easily increased by tightening the spring tension. Remove the "cap" on top of the injector to access the spring nut. Also--make sure the injectors are showing a good pattern for atomization of the fuel. I would also verify the pop-off pressure before I set them. This affects injector timing and will affect proper running of the engine. (Too low a pressure, earlier "firing", too high a pressure, late firing. I was thinking the pressure on those was 2600-2800. I'll check to see if I have it in the manual.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]