Re: 4010 fuel gauge - update

Posted by Gerald J. on March 26, 2007 at 17:28:37 from (67.0.102.228):

In Reply to: Re: 4010 fuel gauge - update posted by 4010rlw on March 26, 2007 at 17:09:42:

I used a bit of plaster lathe, it was lighter than the hoe handle until I fixed the sender on my 4020. The sender on my MF-135 gave troubles when I bought it and the previous owner had been using a hammer handle. Both work for gauging fuel, both could cause a fire, both could introduce dirt to the fuel system to cause more troubles. Gauges that work are nice and both of mine now work.

Speaking of fuel, watch out for the diaphragm of the fuel lift pump leaking fuel to the crankcase. It can do that and still supply fuel to the injection pump (or carburetor in my case). The gas tractor won't burn the bottom third of the tank when the lift pump quits pumping. Which leads one to dispute the gauge's display of avaiable fuel.

Gerald J.

Replies:

• Re: 4010 fuel gauge - update 4010rlw 19:58:55 03/26/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]