Re: (OT) 87 F-250 6.9 Diesel hydraulic operated c

Posted by Harold Hubbard on April 28, 2007 at 19:30:39 from (66.6.176.23):

In Reply to: (OT) 87 F-250 6.9 Diesel hydraulic operated clutc posted by RMinVA on April 28, 2007 at 17:28:15:

Does this truck have the clutch and brake master cylinders reversed from the location of the pedals. If so, check that the brake pedal shaft is NOT slipping in the lever that actuates the master cylinder. If this is happening you will never get the full stroke of the cylinder and the clutch will not release. Ford's cure for the problem is a new lever, but a little weld will do the job, just make sure the lever is in the right place before you stick it. I had the service bulletin somewhere but I think it got tossed out, I will check tomorrow.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]