Re: Using Hyd cylinder for 3 Point hitch top link

Posted by Gerald J. on June 24, 2007 at 19:23:10 from (67.0.102.164):

In Reply to: Using Hyd cylinder for 3 Point hitch top link posted by Randy in SW Pa on June 24, 2007 at 18:44:42:

Baum Hydraulics (www.baumhydraulics.com) has such a cylinder in their catalog.

If the tower on the three point is the same height as the distance between links at the tractor end the three point load will lift parallel. If the tower on the implement is shorter than the tractor end, the load will tilt back when lifted. If the tower on the implement is taller, the implement will tip foward.

Some low cost three point platforms have short towers and tilt backwhen raised.

Gerald J.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]