Re: Stopping a leak from a gas tank. (Any Ideas other than r

Posted by MBU on July 09, 2007 at 10:27:43 from (68.176.130.222):

In Reply to: Stopping a leak from a gas tank. (Any Ideas other than repla posted by jd720spec on July 09, 2007 at 09:37:00:

jd720spec,

They do make some two part epoxy that may work if the tank was drained and then applied, but on a tractor, the vibrations usually break it in a very short time.

If the tank has a pin hole than a sheet metal screw with a rubber washer will work but if it's a crack or a seam, then have it soldered by a professional company that is equipped to do this kind of work.

Good luck and please post back as to what you eventually do to stop the leak.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]