Re: triton plug problems

Posted by Brokenwrench on July 17, 2007 at 09:48:19 from (75.100.179.154):

In Reply to: triton plug problems posted by Mswilliams on July 17, 2007 at 09:34:09:

I do know from experience that if you change plugs on one, the motor better be completely cold. Otherwise your chances of pulling the threads goes way up, and don`t over torque the plugs. Alot of the miss problems stem from moisture getting into the boot running from the coil pack to the plug. With a scan tool you should be able to pick up which cylinder is misfiring and deal with just that one. Unless you want to replace all the plugs, boots, and coil packs. I would think that depending on which cyl is troubled would depend on if it`s easier or harder to get to with the doghouse off. Good luck

Replies:

• Re: triton plug problems Bus Driver 13:49:39 07/17/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]