Posted by HENRY E NC on September 17, 2007 at 07:11:06 from (216.119.7.26):
In Reply to: Re: Batteries posted by John T on September 16, 2007 at 19:43:50:
AGM Batteries are not as needing precise charging as gell cells were/sre. I used gell cells in my boat for 12 years and they needed to be charged at no more than 13.9 volts. I replaced them with AGM (Flat plates) and they could be charged from 13.8 to 14.4 according to the sellers recommendation. Used them for 6 years before I sold the boat. The military uses AGM batteries and I would not hesitate to use them in my tractor if I needed a new battery.Theyy can sit discharged for a long time and then return to full charge status.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
