Posted by James22 on October 05, 2007 at 23:12:06 from (207.179.239.150):
In Reply to: ot corn question posted by kyplowboy on October 05, 2007 at 20:42:26:
NH3 is a lot cheaper per unit nitrogen. We have used urea and 28%. Really need to work both in, but if you have a good, timely rain that may do the trick. We spread urea either with the coops cart or with our spreader. The coop sprays the 28%. We have put preplant chemicals with the 28%, but you got to be sure not to work it too deep. Generally in the spring we put 28% or urea on fall ripped or chiseled ground and work it 3-4 inches as a leveling pass. The chemicals are then sprayed and typically worked shallow again with the field cultivator. This year we didn't do a second pass and it was too dry for the chemicals to effectively work. Since we had planted RR corn it was later resolved by spraying RR.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
