Posted by MSM on December 24, 2007 at 03:55:50 from (62.243.189.132):
In Reply to: soda blasting posted by TGIN on December 24, 2007 at 03:39:16:
I have had 2 pickup trucks soda blasted. It does an excellent job of removing paint,primer and most body filler. It does not hurt rubber hoses,or glass unless you hold it in one position for an extended period of time.It will not remove heavy rust,it will not clean greasy metal.The parts you need cleaned must be free of heavy grease accumulations. The severly rusted areas will have to be sanded down afterwards as it does not cut rust.If you have older,deteriorating fiberglass it will cut down to the glass fibres. But as you said it does not warp the metal as sandblasting would,plus if it gets into anything it is not abrasive,so excessive bagging and taping is not needed.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
