Posted by 335LP on January 27, 2008 at 09:20:49 from (208.246.9.110):
In Reply to: Cheap 1 inch impacts?? posted by Leaky Boot on January 27, 2008 at 08:03:04:
Have one of the blue painted 1" HF impacts and their socket set with budd socket for 5 years now. Get the aluminum finish one as the painted one chips bad hard on the hands. Works fine on most things and truck wheels but I only use it 5 or 6 times a year and did add larger hose and plumbing to feed it enough air and put a few drops of oil in it everytime I use it. Tire shop in town tried one and lasted him less than a week so was waste of money for them but for occasional use they work fine. If you don't have your air plumbed with larger line or use at least 1/2" or larger hose to impact none of them are going to work well and not enough dry air or wet air on small compressor will ruin a high $$$$ gun fast.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
