Posted by 1 Dollar on January 27, 2008 at 19:53:41 from (24.208.219.15):
In Reply to: Re: Day 4 posted by old on January 27, 2008 at 19:31:43:
If you can't get a wrench in there, get a pair of channel locks around the cast part and unscrew it that way. May marr it a bit, but works.
P.S. You seem to be FLYING with disassembly/ paint/ whatever else. SLOW DOWN. I did my first tractor when I was 15-16 and I just turned 17 this month. That tractor was 100% mechanically functional and it still took me 364 days to "refurbish" it. I mostly disassembled it and I completely repainted it (carb rebuild, misc. gaskets). That was all I did. You will be disappointed with the end result if you rush and you may make it a more expensive project than it needs to be. One of the first things I would have done is try to get the oil drained and changed or fill with kerosene. Not primer the whole rusty tractor.
Just some advice from somebody who seems to be playing the same ballgame.
P.S.S. I just bought another tractor on Jan 12. Farmall M. It joins the JD A I referenced earlier. Took me 2 weeks just to get the loose and 100% complete engine running last night (1-26). I may be "slow" but it has worked for me.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.