Posted by Wisconsin Cowman on January 28, 2008 at 17:57:01 from (70.106.240.102):
In Reply to: Day 6 posted by Lanse on January 28, 2008 at 17:20:33:
Lanse you say you can not get your oil pan plug off. I would try a socket that will fit the plug and a 1/2" drive breaker and a long pipe over the handle should be able to break that sucker lose. Is your rim rusted out or bent. If it is not then you should be ok. Just clean up the rim with a sand blaster like Old said and you should be set to go with that.
For the gauge I think this one will work- Oil Pressure Gauge - Complete assembly w oil tube and mounting hardware, Lighted. 80 psi. (Part No: SSW0002) $7.98 [Enlarge Picture]
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
