Posted by Janicholson on February 28, 2008 at 18:56:42 from (66.173.50.48):
In Reply to: Im Backkkkkk posted by Lanse on February 28, 2008 at 16:23:01:
Welcome back, you wern't gone long. But we missed you anyway. If the bearings are still hooked up on the crank of your baby, and the pan is off, why not try to put a small bottle jack 1.5 ton, and block of wood up to the crank, on a rod bearing, and put a little pressure on it. Do not bend anything, just give it some pressure in the direction of rotation. a piece of 2X2 pine with the end cut down to fit on the rod big end would not hold too much pressure, and would probably split if you pumped too much. I think with that modest pressure, and some propane heat on the cylinder walls (Not the pistons) it will come loose. JimN
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
