Tractor Talk Discussion Board |
Re: To AL and RHETT Need more power for a
[ View Follow Ups ] [ Post Followup ] [ Return to Tractor Talk Discussion Board ]
Posted by al on January 27, 2000 at 17:44:28 from (209.74.32.40):
In Reply to: To AL and RHETT Need more power for a posted by Travis on January 27, 2000 at 15:39:35:
Travis, I don't know how much you have heard what they do to these tractors but this idea may scare you. After you put new pistons in it if it needs to be bored. Probably alum High compression. Call Keith Merfeld,319-582-8710. He can lengthen your rods by welding two together.They do it all the time to the stroker motors without failure.It will give you a hell of alot more compression than shaving the head.About $30.00 a rod. Before you do a valve job, take a die grinder and port the head,smooth out the bumps in the casting and you can remove around an 1/8" material without going through.Flare the eyebrow that partially covers the Intake valve. Keith may help you with figuring a compression ratio for your rod length. You can take that A over 200 psi.easily but will have to run high octane gas.Also so make sure you have the later gas manifold. I wouldn't be afraid of used overbore pistons to save money. More if your interested,Al
Follow Ups:
Home
| Forums
Today's Featured Article -
Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|