Posted by Bruce Hopf on June 09, 2008 at 01:57:54 from (216.46.133.10):
In Reply to: What would you do?? posted by caleb on June 08, 2008 at 19:42:15:
I agree with Mark. If you don't have some type of wood stove, or wood burner. I'd sure as heck put one in. The way Fuel Prices are going, I'd burn as much wood as I can. I heat my house with wood. I don't burn any Furnace Oil at all. Personally, I'd forget both the Dozer, and the Skid steer, and buy a decent Chain Saw. I'd cut all the wood you can, into 12" or 16" lengths. The smallest I'd cut the branches, would be 2" in diameter. If the big blocks are 10" and above, Split them in half. Pile the wood on top of skids, or planks in rows so the wood will dry quicker, and by mid October, put in somewhere dry. By far wood is the cheapest wood to heat with. You can get good used chainsaws quit reasonable, on eBay. Or you can take the money, that you plan to use to rent the doz er, or skid steer. a Husqvarna, as far as I know is the top saw right now. Stihl is next in line. Get something with at least 16" bar length, and capability of at least a 24" bar, that way you don't buy too small, and wish you bought bigger later. Up in your Google box, enter Arboristsite.com. when you get there, register your self, like you did for this website, go to chainsaws, forum, and ask for suggestions, and recommendations for chainsaws. It wood be a real shame if you shoved all that into a pile, and Just Burn it. Man this winter is going to be a lot like last year. Signs are already showing, of an early winter. If you don't cut it as fire wood, I guarantee it during the winter months, you will be KICKING YOUR SELF IN THE PANTS!!! Personally this is what I'd sure in the world would do. Bruce.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.