Posted by John Heine on July 06, 2008 at 10:15:46 from (69.245.232.111):
In Reply to: 2240 Overheating posted by Peter White on July 04, 2008 at 04:32:10:
Several different ways to check for cavitation errosion on sleeve.You could drain engine oil fill radiator with water put radiator tester on radiator put pressure let it set see if you get water in pan.I worked for John Deere industrial dealer for 21 years we used lots that type of engine.They made them 3-4-6 cylinder.The way I checked for this problem and I thought this way a easier way.Remove injectors from cylinder head.Remove rocker arm shaft so valves stay closed.Fill radiator up into neck leave cap off.Use rubber tip on blow gun put air into injector hole watch to see if you get bubbling in radiator.BE CAREFULL KEEP HANDS OUT OF FAN AND BELT.WHEN YOU PUT AIR IN CYLINDER THAT PISTON WILL GO TO BOTTOM OF LINER AND WILL TURN ENGINE.JD used many of these engines in industrial equipment this way very common problem.Another way is to remove oil pan fill radiator with water put radiator tester on pressurize system get a light and look where sleeve comes out of block.If you do have this problem youshould replace all the cylinders they will all have damage on them.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
