Posted by Paul from MI on July 17, 2008 at 04:22:27 from (74.204.65.48):
In Reply to: no oil pressure posted by Brenton Mitchell on July 16, 2008 at 20:28:55:
I always fill the oiling system on a newly overhauled engine either one of two ways: Remove spark plugs and crank engine until oil pressure shows. If the oil pump is run by the distributor you can make a simple adapter and run the pump with a small electric drill without turning the engine over. I also have a container made out of an old freon tank with an air pressure fitting on top and a valve and 1/8" npt hose/fitting on the bottom. I hook the hose to the gage port on the engine. Put aboout 2-3 qts. of oil in it and pressurize to 20 psi. Open the valve and it will fill all the oil galleries and prime the pump. Basic idea is have oil pressure immediately when the engine starts. Since you aren't showing pressure, don't run the engine at all until you figure out why.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A Brief History of Tractors in Australia - by Bob Kavanagh. After Captain Cook's exploration of the east coast in 1770 the British Government decided to establish a penal colony in Australia. The first fleet arrived in 1788 and consisted mainly of convicts who were poorly equipped and new little of farming techniques. The colony remained far from self-supporting and it was not until the early 1800's that things started to improve. Free settlers started to arrive, they followed the explorers across the mountains and where land was suitable set up farms. T
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
