Posted by maplehillfrm on September 02, 2008 at 06:57:28 from (70.100.56.64):
In Reply to: Ford F 150 posted by KRUSS1 on September 02, 2008 at 06:34:19:
I had a similar problem, but it wasnt that it would pop out of gear,, sometimes you would have to push up on it to get it to go into park to start,, and I didnt have low unless I really jammed it in,,
mine is a 250 but probably similar engineering,,
I wiggled my shifter while cramped underneath the dash ,, and followed the cable down to where it connects to the steering column area,,, I found the mounting screws were loose and about ready to fall out,, I tightened them up and had all functions back...
you could get lucky as that,,
I made the mistake of taking the dash apart to get to the screws ,, you CANT,, you have to try to get your hand up in there with a torx socket and tighten it from underneath the dash looking at the column, with your head resting on the pedals,, good luck pat
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
