Ron, I've got one in my yard right now, and I've built 3 others over the years. I've helped out with 5 or 6 others, also. It's not what I would call extremely simple, but not that bad an undertaking.
I prefer a round firebox, I think they do a better job. You also don't have any square corners to fool with, which is where you will have leaks, usually. Mine is a 26"X26" long firebox inside a 36" pipe 36" long. This gives me 90 gallons of boiler capacity. With both firebox and boiler round, you have less welding, and less gusseting to do - but can be a little harder to keep square.
Everyone has their own opinions on how to build one, little tricks, innovations, etc., so I won't get into that. Every stove I've been involved with was a little different in design. In that respect, to each his own.
Whatever you do, if you go with a boiler, you MUST install a pressure relief valve (30#), and I also install an air/steam valve - both in the top of the boiler. Safety first.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
