Posted by john in la on October 04, 2008 at 17:07:50 from (72.150.10.4):
Looking for a odd sized lift arm pin.
I bought a cat 2 cultivator. It is a factory 5 row but I am going to cut it down to a 3 row for use behind my cat 1 tractor.
While I can find cat 1 thread end to cat 2 pin end I can not find it the other way.
I know the reason is because a cat 2 implement should not be behind a cat 1 tractor but that is beside the point because I will be cutting this down smaller.
So before I get out the electric wrench and weld the thread end of a standard cat 1 pin onto the implement because it is smaller than the hole it fits in I thought I would ask if anyone has ever seen or knows where I can get a odd sized pin like this.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
