Posted by Jerry/MT on October 28, 2008 at 19:56:46 from (206.183.116.129):
In Reply to: O T - Air vs. Hyd posted by Dutchman on October 28, 2008 at 18:00:29:
If you have the correct pressure for the cylinder size and your seals are good, it doesn't make any difference what fluid you use, air, oil, water, nitrogen, etc you should be able to lift a load. Most hydraulic pumps operate at 1000-2500 pi. If your air compressor is rated at 150 psi and you have a 2 inch cylinder, your cylinder, at most, can push 471 lbs. If you get a bigger cylinder, you can lift more with a 150 psig. If you can get a higher pressure, you can lift more with the same cylinder.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
