Posted by the tractor vet on October 29, 2008 at 17:56:00 from (76.212.239.237):
In Reply to: 806 Farmall Steering posted by Andy S on October 29, 2008 at 17:23:33:
Like Allen said change the filter and i will also add if the oil looks milky then change that also . Now just because ya change the filter and the oil NOT ALL THE oil is drained . There an be water mixed with the oil in the lines from the MCV up to the ft. bolster and in cold weather can sorta start to freeze .So ya may want to crack the fittings up on the ft. and sorta FLUSH the lines . Also ya may need to go thru the MCV as the flow control valve may be sticking a bit and the tractor has to warm up before it is working correctly. Could also be that the springs in the MCV are getting weak and you may or may not need a new pump , but the only way to know for sure is to flow rate the pump and check the pressures and this should be done by someone that has a flow rater and the special fittings to hook up to the MCV.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Your Tractor - by Staff. Maybe you bought it from a friend who didn't know what kind of tractor it was, or perhaps (and this is every tractor fanatics dream) you stumbled across it in an abandoned field covered with weeds but intact. In any case, you have no idea what the make and/or model is. For awhile perhaps it doesn't really matter. Especially if it runs! But pretty soon you'll probably need to tinker with it a bit and maybe buy a part or too. Having a manual is nice. But how does one go about dete
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.