Posted by Chris in MO on November 29, 2008 at 15:37:44 from (69.29.100.28):
In Reply to: really dumb posted by ken in texas on November 29, 2008 at 13:37:28:
This afternoon I cut down a decent sized black walnut which was too close to a shop building. It was leaning toward the building and so I trimmed off a number of branches on that side and put a chain and come-along on the other side to pull it into falling that direction. As I was making the back cut on it, I was thinking...is this really going to fall in the right direction? Well it did and all was well.
But many times I have done really stupid things. For example, buying an old car without checking it out thoroughly. I wanted to do an oil change right away so I drove it up on the ramps. Then I noticed something wrong. The right side upper ball joint had popped loose. Now that was fun.
Or the time we went to look at a house to rent and as I backed away from the house, I didn't wait for the car to stop going backward before throwing it into gear. Blew the CV joint completely out. Now that was a fun repair, Saturday afternoon and two hours away from home.
Or changing the thermostat in my pickup and cracking the aluminum housing...for the second time in two years....
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
