Re: Ford 8N timing

Posted by El Toro on November 30, 2008 at 08:03:58 from (64.12.117.74):

In Reply to: Ford 8N timing posted by Papa Joe on November 30, 2008 at 07:51:13:

You need to bring No1 piston near the radiator to TDC on the compression stroke. When you're at TDC on the compression stroke your timing mark should be aligned and both valves should be closed.

Remove the cap and see where your rotor is pointing it should be at the No1 plug tower note which way the rotor turns. If the rotor is at the No1 plug wire you need to have your plug wires
connected on the cap in the correct firing and the wires go to the correct corresponding plug like in this order, but your No1 wire may be different. Hal
1-3 This turning CCW.
4-2

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]