I had been wondering this too, as I had one that was installed and leaked from when the tire guy did the job. New tire, rim and tube, he said it would stop, nope, it leaked and where it leaked around the valve hole in the rim, the diameter of the hole corroded and became sharp, eventually the whole valve stem shot right out of the tube, was checking it, and glad I did, had it happened in the field away from the garage, would have made the job more difficult.
I've often wondered what happens if a CACL2 filled tube in a tractor tire leaked, if the tube chafed or somehow got an internal leak,would the fluid get in between the tube and rim, would the tire lose pressure or would actual tire bead hold tight. Concern obviously is that corrosive fluid getting to the rim always wondered how you would know or if an internal leak is possible.
Everytime I adjusted or topped off pressure in my loaded tires, the fluid shoots out, just have to be quick and rinse down the area after. You may want to get those repaired, only seems to get worse, I had this leak for 5 years and the valve finally popped out about 6 weeks ago.
Never took a tractor tire apart before, broke the bead, used a less than desirable pair of spoons I got at TSC, not even a matched pair, preference is for the drop center type, used the down pressure on loader to break the bead, mis matched spoons to remove the tire which was the most difficult aspect of it, have to be careful not to damage the bead tip, pry up a little at a time and use tire lube or similar to make it slippery. I repaired the rim, plugged the old hole by welding and grinding the inside smooth, then wire wheeled it heavily, painted the affected area with zinc rich galv spray. I followed the adavice of people here, also inflated the tube 1x, then let the air out, re-inflated, just had no time to re-load the tire, there is a real inexpensive valve for this, you can use with a garden hose, napa sells a pump you can power with an electric drill, not goint to be fast, but will cost less than a tire service call. I've since done some brush hogging and towed some heavy logs, funny that side is the one that slips first now, also have to remember to be careful until it is re-loaded, one side being heavier now.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - On the Road with Dave Gohl: Deere Departed Friend - by Dave Gohl. Have you ever had to part with a dear friend? It's not easy. If it's due to death, your feelings could be in disarray for days, months or even years. Even now after almost 4 years, I still miss my dad. I remember when I was a kid my dad sometimes would tuck my brother and I in at night and we would ask him questions about his childhood on the farm. To this day, it's some of the best stories I've ever heard. And now, I'm so glad that I asked those questions, and if I were a little smarter i
... [Read Article]
Latest Ad:
1953 Ford Jubilee Tractor. Last driven 5 yrs ago. Parked ever since. As is as seen
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
