If all that is true then why are the neutral and ground wire connected together at both ends.
Not supposed to be connected at both ends. The neutral is only to be bonded to earth potential at the hydro services 1st distribution panel.
At the equipment used and the main box. My nephew who has a degree in Electrical engineering and installs solar systems was up here and was rewiring my house. We both laughed about the phony ground wire that seems to do nothing but sell wire.
Send the kid back to school.
In Oregon the power companies have to run a ground between every pole and ground it to the earth. They complain a lot about the waste of wire.
They are complaining about cost between, "It works" vs. "doing it right".
I know a lot you experts have bought the ground wire thing hook line an sinker but stop and think about what it actually does. The older electrical things only had two wires and they ran very good. But if you plugged them in backwards the outside of the metal case became hot. The 3 prong plug made this imposable to do this if the house was wired correctly. PS a neutral wire is not needed on 220 equipment only on 110 because you have to use one hot and a ground to get 110.
One line and neutral, not one line and ground. Running load current through ground/earth is looking for trouble as previously explained.
If you don't believe this then take light hook up one wire to center and the other wire around the outside and push it into the ground, the light will work quite well.
Low current load. Try it with 30 amps and start touching between the ground rod and true earth.
This won't work on your car because the battery is the power source and needs to make a complete circuit back to negative post. Walt
Electrons flow from the negative post to positive post. The chassis return system on vehicles causes much confusion when somebody trys to think an AC building service the same way.
Why pray tell do we run two insulated lines, an insulated neutral and a bare ground to the stove and clothes dryer.
I can wire your entire house with porcelain fence knobs and barbed wire. Everything will "work" but is it "right".
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.