Posted by buickanddeere on December 23, 2008 at 09:34:19 from (216.183.136.2):
In Reply to: Re: Block heaters posted by IaGary on December 23, 2008 at 05:07:46:
120/208 from a wye seconday transformer is a scommon as dirt in malls, offices, small to medium businesses, large farms etc. In large business's etc. The 208 will come from a transformer with 600 delta primaries to 120/208 wyw secondaries. Lets you use ordinary 120V appliances and equipment. Most 240V equipment will run on 208V. Sometimes the winding taps on the transformer get upped a little. 130/228V never hurt anything. 347/600V three phase from a wye connection on secondary side of the utility service transformer is very common. About 1 amp per HP on three phase. Allows motors up to 200HP before getting into huge cables. Or having to go to 4160V or 13.8KV. You can carry a large amount of power a long way with only small cables using 600V. There was a trend for a couple of years in the 1960's in downtown Toronto and else where to go 240/416. One service to do everything. All the small loads were to be European style 240V office equipment. The motors in the mechanical rooms 416V three phase. The idea didn't go very far. Step down transformers added all over the place to obtain 120V. 440V US motors used as replacements instead of purchasing 416 equipment from Europe.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
