Posted by rrlund on January 02, 2009 at 07:13:06 from (216.46.212.62):
In Reply to: 6 to 12 volt posted by northeast puller 1 on January 02, 2009 at 05:34:02:
Biggest problem on most of them is that the battery cables have been replaced over the years with the small 12 volt cables. With 6 volts,you loose 2/3s of your AMPERAGE with those small cables. You still have 6 volts,but no cranking amps to speak of. As for the Oliver 88 that fixerupper speaks of,they had an inherant problem that would start to show up when those tractors were just a couple of years old. They were grounded up under the dash and would start to rust between the cowl and frame so you lost ground. Run 2.0 guage cables on those and make the ground long enough to reach one of the starter bolts at the bell housing and you won't believe how they'll spin with 6 volts.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
