Kari: I definitely think you should have a ROPS canopy for around the woods. Over the years I had 3 tractors with cabs, very nice if your clocking 1,000+ hours per year and someone is taking the time to clean both cab and glass weekly. Two of my tractors ran around the clock on custom work, rain or shine, in summer. Cab is almost a must under those conditions.
My third tractor stayed at home, baled hay, mower conditioner, etc. I always figured the worst dust one could get in a cab was hay or grain dust. I found my operators didn't want that tractor for baling hay. I had a tractor about same size without cab. In the end we removed doors and back window for haying. I realize cabs are much tighter on new tractors today than back in 60s and 70s, however cabs just don't lend themselves well for some work and haying is one of them.
Since I retired I had an oportunity to run a tractor mounted eastern Canadian blueberry harvester for a guy. He had 3 of these harvesters, one on an open station IH 484, second on a Ford 4610 with cab and the 3rd on a 80 hp Kubota with cab. These blueberry harvesters take a bit of getting used to skills. He gave me the Kubota, told me not to try and follow the 484 as he'd had dozens of operators, and no one could match the 484 or the guy that operated it. I thought to myself, "NOW THERE IS A CHALANGE IF I'VE EVER SEEN ONE." I decided to get a few days in hone my skills then one day I saw my chance to follow the 484. When he was fully loaded, I followed him to the waiting truck to off load our product. We both had same number of boxes. I turned to the owner, and before I could say anything, he said, "you didn't beat him." I responded, "Oh yes I did, the fact I was following 484 every trip I made around that small field was 28 feet shorter than his round." He agreed I was right, and knowing I had years of tractor experience, sat me down and asked why they had never been able to do this before. I said the single biggest reason, not many people can do precission tractor work from the confines of a cab.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Usin Your Implements: Bucket Loader - by Curtis Von Fange. Introduction: Dad was raised during the depression years of the thirties. As a kid he worked part time on a farm in Kansas doing many of the manual chores. Some of the more successful farmers of that day had a new time saving device called a tractor. It increased the farm productivity and, in general, made life easier because more work could be done with this 'mechanical beast'. My dad dreamed that some day he would have his own tractor with every implement he could get. When he rea
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
