Posted by old on January 16, 2009 at 08:50:33 from (4.244.186.18):
In Reply to: Carburetor posted by Kenfarmall on January 16, 2009 at 06:52:28:
Well did you ever put any thing in the cylinders before you tried to start it. I.E. like oil, ATF etc. If you didn't then you have a very good chance you have very low compression and if so yep you also get very poor suction so yep gas will not make it to the cylinders. I would put about a !/2 cup of ATF in all the cylinders and walk away from it. One other thing you can try that will also tell you more is pull the air tube off the carb and hold your hand over the carb to see how much suction it has. Shoot it might even start doing that. BTDT and had an Oliver 60 engine that did the same thing. I checked the compression and it was less then 25PSI in all cylinders. Filled them with ATF and let it sit. After a few days compression was up over 100PSI
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
