Posted by RayP(MI) on January 16, 2009 at 18:38:46 from (216.46.213.236):
In Reply to: Re: DTV ON HOLD posted by Gene Bender on January 16, 2009 at 16:27:49:
Well, I've been a ham radio operator for over 30 years, there are two other hams in this house. I have taught electrical engineering and avionics on the college level. Also worked in land mobile service. (I tell you this to establish that I know a bit about radio and electronics.)
Now - digital is probably more efficient, and they can get more bang for the bucks. BUT with digital, you have to have a perfect signal. Otherwise it breaks up and drops out. With analog you can put up with a little snow. Digital is long gone. We live in a fringe area, and there's only so much you can do with antennas, preamps, etc. I'm afraid that this digital revolution is going to be a major disappointment. Already looks like we're going to loose several stations, and one complete network. Putting it on hold while the govt. catches up will only prolong the misery. When the finally do throw the switch, there's going to be a bunch of unhappy viewers, trust me on that!
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.