If you can't get a blower to sink down thru the snow because it is hard packed, you sure won't be able to get a big bucket to. The blower is alot heavier than a blade and if your top link is adjusted correct, the moldboard on the blower will cut under the hard pack. I occasionally have to use the bucket at an angle to scrape right down to blacktop but even then, with the front wheels off the ground to get enough down pressure, I come in with the blower to clean it up. You haven't said what tractor you are using, if it is some beast like a 1466 or a 5020, then an over sized snow bucket might work better because you have the weight to make it take a good bite. But if you are using anything much lighter than that, you will still be better off using your blower, cocked at the right angle and maybe with some extra weight thrown on it. I use an 84" blower on my 720 and will fill a couple feed bags with sand and throw those on top of the blower. With the right angle on the blower so the moldboard hits the ground, 90% of the time it is scraped right down to blacktop. I have a 1/8 mile up hill the whole way driveway at the barn and have figured this way works best for me.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fordson Model N: Field Service Operations and Lubrication - by Anthony West. The daily or weekly servicing of any vehicle is of the utmost importance, and in days gone by when our favorite tractors were doing an important and Commercially vital job on the farm, these service operations would make a major difference to the running costs and economy of the farm. This being so, it surprises me to see how many enthusiasts attending rallies, shows etc, seem to be unaware of the importance of this constant attention. Possibly the modern machine with its 6,000 mile or even once
... [Read Article]
Latest Ad:
Nice Marvel Schebler DLTX 8 bronze body carburetor For 1934-1936 unstyled A tractor.Serial No.410000-42850. All restored and ready to use.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
