Posted by ericlb on January 29, 2009 at 20:11:45 from (72.173.211.235):
In Reply to: Pickup box trailer posted by C-man on January 29, 2009 at 19:18:34:
a couple things, first leave the rear end alone, the gm half ton rear axle is not a full floating design, it needs all the guts in there as well as kept full of gear lube to stay alive it will be just fine as long as you check it once in awhile, the other thing is when you lay out the hitch, make absolutly, positivly, 100% sure that you end up with the center of the coupler in the center of the trailer and the same triangulation on both frame rails or it will only be good for use off road behind a tractor it wont track straight on the hiway, you can take the brakes out but why? i have seen one trailer where the guy took what looked like the handel and ratchet off a manure spreader and hooked up to the emergency brake cables so he could apply it to keep the trailer from rolling when unhitched, myself , i would be afraid the brakes would stick on if it wasnt used very much
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
