Posted by Bill(Wis) on February 13, 2009 at 04:48:00 from (71.249.198.251):
In Reply to: OT-Balistics question posted by Bill Porter on February 12, 2009 at 20:13:07:
Your question reminds me of some testing the Army did at Yuma Proving ground where they were doing exactly that, only with a 175mm Long Tom! They had developed a new fuse for the 175mm shell and wanted to fire some using inert rounds and recover the fuses as undamaged as possible. The solution was to fire them vertically. That way, the round would go right straight up and come to a stop without arcing over and fall back to earth base first thus sparing the fuse from impact damage. They used cables to stabilize the tube and they fired those things for days. Cinetheodolite cameras positioned on adjacent mountaintops took pictures of the rounds from the time they left the tube until they struck the earth. I don't know how high they went. All I did was fly the helicopter out to where they landed where the survey crews could get a fix on us while the observer threw a flag in the hole. Those rounds sunk in so deep that they used a specially built bulldozer (FMC) to dig them out.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: Winterizin Engines - To Drain or Not to Drain? - by Staff. Another great discussion from the Tractor Talk Discussion Forum. The discussion started out with the following post: "Winter is fast approaching..for a gas tractor should the gas tank be drained and run the engine til the carb is dry or do the gas stabilizer products I've heard of work? (tractor will not be used til spring) any other tips for winterizing?? "
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.