Tractor Talk Discussion Board |
Question about a 6V mag ignition tractor wiring ???
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Alberta Mike on July 11, 2000 at 15:12:32 from (207.153.51.112):
I've got a 1945 Avery model A, electric (6V) start and a magneto ignition. I could sure use a wiring diagram if anyone has got one. Someone who had this tractor must have had a better use for the wire than the tractor did because most of it is gone. This is my first wiring of a mag ignition tractor. Is it pretty much the same as any distributor ignition tractor from those times other than the wire that would normally go to the coil would go to the mag? I've wired a few of those so that would be a start. Also, did this tractor run a positive ground electrical system like most stuff from those days? And the generator has a little shut off relay box on top so I assume that the tractor should have the old 3-position charge control/light switch as well, is that correct? Anybody out there can help out?
Follow Ups:
Home
| Forums
Today's Featured Article -
Engine Valves - Some Helpful Information - by Staff. Intake - On the intake stroke the piston moves doward, sucking in carburized fuel through the open intake valve. Exhaust valve is closed. Compression - With both the intake and exhaust valves closed, the pistons upward stroke compresses or squeezes the fuel into the combustion chamber. Firing - Ignited by the spark, the compressed fuel explodes and forces the piston downward on its power stroke. Intake and exhaust valves are closed. Exhaust valves and seats are exp
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|