Posted by Loren in MN on March 11, 2009 at 13:31:48 from (75.168.59.87):
I have a Schebler carb that says model TT on the side of the lower casting in raised letters. It also says TT-29-A in stamped letters on the bolt flange for the incoming air side of the carb. It also has the letters T28 in raised letters on the upper half of the carb castings. I had posted an inquiry in the Minn-Moline forum a week or so back, as this was taken off of a UTIL -Moline U Industrial.
I would like to know what other tractors (Brands/Models) may also have used this carb and if it is in fact a Schebler TT or TTX carb. I seemed to get a few different opions on my first post. Since then, I did more cleaning and found the TT-29-A stamping. The top or mounting flange measures 3 5/8" at tips of the flange with a 2 5/8" bolt spread. The intake from the air cleaner has a 4 1/4" flange and a 3 1/4" bolt pattern. It does have a different body style than a TSX or TRX carb. Thank you for any help.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
