Posted by Bob on May 13, 2009 at 09:27:31 from (69.178.228.68):
In Reply to: Seeding with a drill posted by Ken Macfarlane on May 13, 2009 at 09:10:44:
In most cases, you will need the older drill to be equipped with a "grass seeder attachment" if you want to be able to get a reasonable (low) seeding rate.
The drill will likely have a 6" or 7" spacing. Typically, the grass seeder feed tubes just hang down ahead of the disc or hoe openers and drop the grass seed on the ground ahead of them so it gets distributed around, not just in exact rows. You set the drill to run REAL shallow, just scattering the soil around a bit over the seed, followed by the press wheels or cover chains.
In this photo of a newer DEERE drill, the little box with the cover open at the front of the main seed hopper is the "grass seeder attachment". Older drills and/or other makes will be set up in similar fashion.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
