Tractor Talk Discussion Board |
Re: OT computor question
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by MarkB_MI on June 05, 2007 at 03:39:24 from (216.234.98.57):
In Reply to: OT computor question posted by Leon R on June 04, 2007 at 18:01:27:
Satellite connections suffer from high latency, which is the time it takes for a signal to get from its point of origin to its destination. The problem is that each packet has to go all the way to the satellite and back, and it can't go any faster than the speed of light. It takes about half a second for a packet to go to the satellite and back, which is far slower than typical dialup connections. (traceroute on my dialup is about 200 milliseconds, which translates to a latency of 100 milliseconds.) You can get an idea of the latency of a connection using the traceroute command. (It's "tracert" on Windows and "traceroute" on UNIX. I haven't used a Mac for a long time, but I assume that some form of traceroute should be available, as OS/X is a UNIX variant.) In theory, high latency should not affect file transfer performance. HOWEVER, that is only true if the TCP buffer at the transmitting site is large enough to keep the "pipe" full. If the transmitting site's buffer is too small, then it will run out of data to send before it receives an acknowledgement from the receiving site. When this happens, the file transfer is interrupted and you don't get the full bandwidth. I suggest that you try downloading files from different sites and see if the performance is consistently much worse than whatever bandwidth your friend is paying for. If it is, he needs to complain to his service provider.
Replies:
Home
| Forums
Today's Featured Article -
The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|