Re: Bush hog question.

Posted by KRIS (ALABAMA) on September 24, 2000 at 06:05:45 from (152.163.201.61):

In Reply to: Bush hog question. posted by Kermit on July 15, 2000 at 04:40:47:

I AGREE WITH THE FIRST GUY IF YOU ARE USEING A LOW GRADE SHEAR PIN AND THE PROPER DIAMETER AND IT IS NOT SHEARING THEN YOUR NOT HURTING YOUR TRACTOR , AFTER ALL I HAVE SEEN TRACTERS THAT THE PTO TAIL SHAFT HAD BEEN BUSTED EVEN USEING A SLIPP CLUTCH DESIEGN WENE I WAS MOWING INTERSTATE RIDE AWAYS THER IS ONLY SO MUCH SHOCK THEY WILL TAKE , IF YOU DO BUY THE SLIPP CLUTH DESIGHN MAKE SURE YOU LOOSEN IT AND SLIPP IT BEFORE MOWING ANYTHING BECOUSE THE PAINT ON IT BELIEVE IT ARE NOT WILL HOLD IT ENOUGHT TO COUSE DAMEGE TO YOUR DRIVE LINE ARE TRACTER IF YOU HIT SOMETHING

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Bush hog question. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]