First, the hot wire is not grounded; when animal touches it the circuit is completed to ground through the animal. Second, the device is grounded real good, go on line to get exact help, but you will see that the ground at the fence charger is very critical. Mine recommends 3 six foot rods driven in the ground, spaced 10 feet apart in a row, with the ground wire connecting all three of them to the charger. As for the deer, here is what is fool proof and will absoultley work - been doing it this way for years. Use steel single strand 14 guage wires spaced about 20 inches high and one about 30 to 36 inches high. DO NOT tighten the wires, just loosely drape them enough to stay up. DO NOT make the fence any taller than 3 feet max. Deer will not jump such a fence, they will try to just walk through it by stepping over the bottom wire, and they will get trained very quickly. If you use more wires, if you make the fence taller, if you tighten the wires real tight, then they will jump it. Tom
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
