Posted by Owen Aaland on June 28, 2009 at 23:57:59 from (65.165.246.156):
In Reply to: 806 Ta section noise posted by josh braman on June 28, 2009 at 20:26:47:
josh braman said: (quoted from post at 20:26:47 06/28/09) Well we torn the MCV pump out and the main gear Is missing 2 teeth. The way it looks we have to tear the TA out to fix that gear. IS this right or there is a easier fix. any feed back is great... If we need to pull that section we figure on having the TA rebuilt so any feed back is greatly appreciated
What gear are you referring to as the main gear? If it is the gear that drives the MCV pump, you can remove that one without splitting the tractor. The one above it requires a clutch split. All other gears require the clutch housing be removed from the tractor.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Nuts and Bolts of Fasteners - Part 2 - by Curtis Von Fange. In our previous article we discussed capscrews, bolts, and nuts along with their relative hardness and thread sizes. In this segment we will finish up on our fasteners and then work with ways to keep them from loosening up in the field. Capscrews, bolts and nuts are not the only means of holding two parts together. When dealing with thinner metals like sheet tin, a long bolt and
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
