First off there make sure you have a solid base nothing will work right if you don't.Then put in rebar tying it in place.Fiber is better than wire mesh for 2 reason 1)Its all thru the concrete 2)Finishers usually stomp the wire mesh to the bottom of the slab where it does little if any good.And this is the MOST important thing make sure the concrete is put down properly.Most finishers want to put way too much water in the concrete which makes the gravel go to the bottom and delutes the cement which can then turn 3500lb concrete into 1000lb concrete.Make it plain to the finisher that the concrete will be poured with no more than a 4 1/2" slump 5" at the very most by a SLUMP TEST, NOT the Finisher's estimation which most finishers think a 7" slump is a 4". Most Non Commerical concrete is poured out of spec.If I were doing a big slab I'd pay an Independent Testing Agency a couple hundred bucks to come out and supervise the job and take test cylinders.Also get all involved together and make it plain to them before the pour that a tester will be there and his is the final word.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Niagra View Mobile - Powered by a 1959 Ford Tractor - by Mark Massey. In 1959 the Niagara Frontier Transit Inc. of Buffalo, New York designed and built six Viewmobiles for the Niagara Frontier Sightseeing Inc. for use as a sightseeing ride at the Niagara Falls State Park, Niagara Falls, New York, powered by a 1959 Ford 611 Tractor.
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
