Posted by buickanddeere on November 14, 2009 at 09:30:24 from (209.240.120.48):
In Reply to: HDTV Antenna posted by PopinJohn on November 13, 2009 at 17:39:25:
I agree with the others that something suddenly shorted or went open. When up there install a "two part" amp.Those amps with the power supply and ampler module together at the TV are for the birds. I use a wee dab if silicon grease inside the connector. And a blob of silicon around the connector to try and keep the moisture out. If the end of the cable has been water soaked. The cable can be internally shorted 2-3 feet down it's length. Rotor position is everything. 2-3 degrees is the difference between no signal or a watchable picture here. The so called HD antenna tends to be a much more compact and sturdy unit that stresses the tower and rotor less. The "HD" antenna is 2/3 sized, usually a channel 7-59 or 7-69 unit. If channels 2-6 are included it just adds all those wide elements which also pickup FM radio interference. Those 5 channels 2-6 are not really lost. I cut my 2-69 HD antenna into a 7-69 antenna and picks up 2-6 just as well as it ever did.In fact better, there is less "herringbone" from the *(^%&*& FM transmitter 3 blocks away.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Hydraulics - The Basics - by Curtis Von Fange. Hydraulics was one of the greatest inventions for helping man compound the work he can do. It’s amazing how a little floor jack can lift tons and tons of weight with just the flick of a handle. What’s even more amazing is that all the principals of hydraulic theory can be wrapped up in such a small package. This same package applies to any hydraulic system from the largest bulldozer to the oldest and smallest tractor. This short series will take a look at the basic layout of a simple hydraul
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
