|
Tractor Talk Discussion Board |
Re: Re: Re: CUB CARBURETOR
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bus Driver on February 04, 2001 at 18:20:28 from (64.53.28.47):
In Reply to: Re: Re: CUB CARBURETOR posted by twopop on February 04, 2001 at 17:11:10:
The adjustment screw is for the idle mixture. The high speed jet is not adjustable. To try to restore normal operation without removing the carburetor, remove the drain plug (probably steel with a square head) protruding from the bottom and let some fuel flow through. After the fuel appears clean, replace the plug and shut off the fuel under the fuel tank. Remove the high speed jet which is a hex head brass fitting on the outside (side) near the bottom. Clean that part, (careful with the gasket on it) checking all the holes in it, especially the small hole in the end, but NOT enlarging the holes AT ALL. Replace that jet and turn on the fuel. If that does not help, carburetor rebuild is the answer.
Follow Ups:
Home
| Forums
Today's Featured Article -
George's Fordson Major - by Anthony West (UK). This is a bit of a technical info to add on to the article about George's Major in the "A Towny Goes Plowing" article. George bought his Major from a an implement sale about 18 years ago for £200.00. There is no known history regarding its origins or what service it had done, but the following work was undertaken by Harold alone to bring it up to show standard. From the engine number, it was found that the major was produced late 19
... [Read Article]
Latest Ad:
18-32 Case Cross Motor
[More Ads]
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
