Posted by Gerald J. on December 08, 2009 at 08:15:33 from (70.219.156.183):
In Reply to: Planter Questions posted by Erik Ks Farmer on December 07, 2009 at 18:37:56:
My crops were much better with the 7000 than the 400. I paid $1500 for a 4 row wide, then spent bucks on narrowing the wheel frame, rebuilding the finger units, and adding Kinze bean units plus Dawn trash whippers. I'll put it up against any new planter for planting quality. This year I rented out the land so I could do other things so I should be working on selling my planter. I'll do that in a year or two. Want to keep it to keep pressure on the tenant.
The 7000 planter is very nearly as good as the latest planters but you have to check it for wear. The main wear spots are the gauge wheel arms and the tail piece bushings. The gauge wheels should be tight against the opener disks and without side shake. Opener disks wear too. The tail piece should only move up and down, not side to side. All these bits are replaceable or repairable, both from deere and from after market makers, like Shoup and RK products.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
