Posted by Paul from MI on December 10, 2009 at 15:39:00 from (204.106.244.65):
In Reply to: hydrolic cylinder posted by kathleen kanzler on December 10, 2009 at 15:18:12:
Could be several problems. Do the tractor hydraulics work properly with other implements and/or cylinders? If so the problem lies with this particular cylinder and disc. Is the something mechanically limiting the disc so it can't raise? If so the pressure relief valve on the hydraulics should be squealing when you try to raise the disc. If something is wrong inside the cylinder allowing the oil to bypass the piston under load the pressure relief valve will not open, so no noise. I would check for a mechanical issue, then try it with a known good cylinder. You don't say what size the cylinder is, but a small cylinder like a 2" may not have enough force to lift the disc. The same may be true if the disc was operated by an older Allis Chalmers tractor which had a very high pressure system using smaller cylinders. Just some thoughts, Good luck, Paul
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - A City Guy's First Tractor - by Fred Hambrecht. After living in apartments in Atlanta for more years than I care to remember, the wife and I decided to move to the country. Humming "Green Acres is the place for me..." we purchased a 29 acre tract about 60 miles south of Atlanta. Next came the house, I could talk about that ordeal for another two weeks... But, I want to talk about my tractor! We didn't even own a lawnmower, and all of a sudden we had enough grass to feed all the starving children of the bovine world. Naturally, I talked
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
