Posted by TimV on January 06, 2010 at 08:25:03 from (24.39.241.218):
In Reply to: Broken dowel pin posted by Icuby on January 06, 2010 at 05:41:17:
The fun part about a dowel pin is it is probably going to be hardened, which will make drilling, tapping, etc. considerably more difficult. You may be able to use a combination of methods--perhaps welding two nuts together, welding them to the pin, then using a slide hammer on a bolt threaded into the nuts. That way you'll get away from having to drill and/or tap it, which may require carbide or cobalt tooling. You may get lucky and the dowel will only be case-hardened, in which case another thing to try is drilling and tapping the "soft" center for a grease zerk and pumping grease into the hole, which will push out the dowel pin.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - An AC Model M Crawler - by Anthony West. Neil Atkins is a man in his late thirties, a mild and patient character who talks fondly of his farming heritage. He farms around a hundred and fifty acres of arable land, in a village called Southam, located just outside Leamington Spa in Warwickshire. The soil is a rich dark brown and is well looked after. unlike some areas in the midlands it is also fairly flat, broken only by hedgerows and the occasional valley and brook. A copse of wildbreaking silver birch and oak trees surround the top si
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
