Posted by trucker40 on January 08, 2010 at 12:39:32 from (70.240.148.123):
In Reply to: setting valves posted by rocko on January 08, 2010 at 11:20:10:
What I have done is take a feeler gauge and adjust while its running.You want them close before you start so you want to make sure none of them are too tight or too loose before you try to start the engine so they dont bend pushrods or valves.This might not work either.
Another thing you can do is turn the engine until its ready to set number 1.Look close at your adjusters.Will you have to move either on a long ways in comaparison to the rest of them to get it adjusted?Is one of them tight?Are the valves on 6 loose?If you dont like what you see turn it over again to number 1.Are both sides a little loose?If so you are on the right stroke and can do them by the firing order after that. If you have any trouble post again and maybe I can help.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
