Posted by Banditfarmer on January 29, 2010 at 04:53:13 from (174.103.146.69):
In Reply to: Welding question posted by NCWayne on January 28, 2010 at 23:41:57:
You right in some respects. I use to make mig wire from .030 to .078 and it all depends on what is being welded and were. You can weld new steel up to 2in with a mig if you have the right mig welder. The .078 E70C-6 we made had to be done by a robot because you cant control the weld by hand. We sold this wire to the ship builders and to tank builders (military). Mig and stick have there place on the farm. Just about everyone has a stick welder but most farms dont have a mig. For thinner metals I will mig it, but if its 3/16 up I will get the stick welder out and do the job. I have never broken a stick weld that I made but have a mig weld. The biggest problem with migs is you make a good weld ( on 3/16 up) but it dont penetrate that good and it brakes. The thing about it is simple. Most people that can stick weld (good)cant weld with a mig that well. And if you can mig with the best of them you cant stick as well. I made lots of test welds with a robot and could not come close to it doing it by hand. You will never see some one putting up high pressure (steam) lines up and use a mig to weld it! THEY ARE STICK WELDED FOR A REASON !! Stick and mig have there place on the farm and up have to be smart enough to figure out witch is the best for the job at hand. Just my $.02 Bandit
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Madison's County - by Anthony West. Philip Madison has been a good friend of mine for quite some time. He has patiently suffered my incessant chit chat on the subject of tractors for longer than I care to remember, and on many occasions he has put himself out, dropped what ever it was he was doing, to come and lend a hand cranking handles, or loading a find onto a trailer. Although he himself has never actually owned or restored a tractor, he was always enthusiastic and always around helping with other peoples projects.
... [Read Article]
Latest Ad:
1953 Ford Jubilee Tractor. Last driven 5 yrs ago. Parked ever since. As is as seen
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.