Posted by RodInNS on January 29, 2010 at 20:57:02 from (216.118.158.123):
In Reply to: Grazing- Who does it? posted by Don-Wi on January 29, 2010 at 19:44:29:
Hmmmm.... When the MiG prophets come up with a way to make 3.9 or better milk on grass instead of 3.1 or 3.3... mabey I'll be more of a believer.
We always pastured in summer. After I came home from college, we started doing MiG. One thing is for certain... it's Management intensive for sure.
You need to be carefull listening to these guys... I notice that ~most~ of them don't milk cows. Most of them don't own ~any~ meaningfull amount of equipment. Most gloss over the winter related feeding problems of swath grazing or whatever gospel they follow on that end... or simply suggest you buy your winter feed, etc. That etc.... carries a lot of variables.
After 10 years of this, I'm at the point where I'm just as happy to spend another day and a half chopping the summer's feed and another day and a half hauling manure. You can maintain your routine. You can maintain your production and I think when you run the numbers you'll find that you're further ahead now than if you had to spend thousands building fence, then labor on top of more labor to move fence twice a day, every damn day.
If I was somewhere where I didn't need to store feed for 7 months I might think differently as I wouldn't need to own equipment, etc... and that would drastically change the economics of it... but this way, we're fully equipped to graze and fully equipped to feed and neither one being fully utilized. Think ~carefully~ about that.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Third Brush Generators - by Chris Pratt. While I love straightening sheet metal, cleaning, and painting old tractors, I use every excuse to avoid working on the on the electrics. I find the whole process sheer mystery. I have picked up and attempted to read every auto and farm electrics book with no improvement in the situation. They all seem to start with a chapter entitled "Theory of Electricity". After a few paragraphs I usually close the book and go back to banging out dents. A good friend and I were recently discussing our tractor electrical systems when he stated "I figure it all comes back to applying Ohms Law". At this point
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
